Made in America

Made in America

LED Linear Luminaire

LED Linear Vapor Tight Luminaires

EPCO’s LED Linear Vapor Tight Luminaires are a reliable, sustainable solid-state illumination system solution.

Learn More

PowerTails® Device Wiring Conductors

PowerTails® Device Wiring Conductors

PowerTails Device Wiring Conductors are used by Contractors that wire Commercial buildings and use single and/or multi-gang metallic boxes.

Learn More

Ground Bonding Jumper Kits

Ground Bonding Jumper Kits

Engineered Products Company’s (EPCO) Pre-Fabricated Ground Bonding Jumper Kits are one of the most critical elements in a safety grounded system to provide a positive

Learn More

Health Care Fixture Whips

Standard Health Care Fixture Whips

Engineered Products Company (EPCO) Standard Fixture Whips are the common thread among all of a Health Care Facility’s lighting systems.

Learn More

Illumination Control Health Care Fixture Whips

EPCO's Illumination Control Fixture Whips are the common thread among all of a Health Care Facility’s lighting systems.

Learn More

Insulated Solid Wire PigTails™

8" Insulated Solid Wire PigTails

EPCO’s 8" Insulated Solid Wire Ground Bonding PigTails are recommended for use in metal box applications.

Learn More

12" Insulated Solid Wire PigTails

EPCO's 12" Insulated Solid Wire Ground Bonding PigTails can save the Contractor up to 50 cents per installation.

Learn More

10" Insulated Solid Wire PigTails

EPCO's 10" Insulated Solid Wire Ground Bonding PigTails are recommended for use in metal box applications.

Learn More

6.5" Insulated Solid Wire PigTails™

EPCO's 6.5" Insulated Solid Wire Ground Bonding PigTails are recommended for use in metal box applications.

Learn More

Metal Clad Whips

Solid MC Whips

EPCO’s durable and reliable MC Whips are built in the USA.

Learn More

Insulated Stranded Wire PigTails™

8" Insulated Stranded Wire PigTails

EPCO's 8" Insulated Stranded Wire Ground Bonding PigTails can save the Contractor up to 50 cents per installation.

Learn More

10" Insulated Stranded Wire PigTails

EPCO's 10" Insulated Stranded Wire Ground Bonding PigTails can save the Contractor up to 50 cents per installation.

Learn More

12" Insulated Stranded Wire PigTails

EPCO's 12" Insulated Stranded Wire Ground Bonding PigTails can save the Contractor up to 50 cents per installation.

Learn More

Illumination Control Fixture Whip - 120 Volt

Solid Wire - Screw-In 120V IC Fixture Whip

EPCO's Solid Wire Screw-In 120 Volt ICFW is an integral component for illumination and control of all lighting systems.

Learn More

Stranded Wire - Snap-In 120V IC Fixture Whip

EPCO's Stranded Wire Snap-In 120 Volt ICFW is an integral component for illumination and control of all lighting systems.

Learn More

Solid Wire - Snap-In 120V IC Fixture Whip

EPCO's Solid Wire Snap-In 120 Volt ICFW is an integral component for illumination and control of all lighting systems.

Learn More

Stranded Wire - Screw-In 120V IC Fixture Whip

EPCO's Stranded Wire Screw-In 120 Volt ICFW is an integral component for illumination and control of all lighting systems.

Learn More

Illumination Control Fixture Whip - 277 Volt

Solid Wire - Screw-In 277V IC Fixture Whip

EPCO's Solid Wire Screw-In 277 Volt ICFW is an integral component for illumination and control of all lighting systems.

Learn More

Stranded Wire - Snap-In 277V IC Fixture Whip

EPCO's Stranded Wire Snap-In 277 Volt ICFW is an integral component for illumination and control of all lighting systems.

Learn More

Solid Wire - Snap-In 277V IC Fixture Whip

EPCO's Solid Wire Snap-In 277 Volt ICFW is an integral component for illumination and control of all lighting systems.

Learn More

Stranded Wire - Screw-In 277V IC Fixture Whip

EPCO's Stranded Wire Screw-In 277 Volt ICFW is an integral component for illumination and control of all lighting systems.

Learn More

Accessories for Linear Luminaires

Linear Luminaire Diffusers

  • 100% Impact Resistant Acrylic Diffusers.
  • No tools or fasteners are required for installation.

Frosted Smooth Diffuser (P/N GFF-DS4)&nb

Learn More

Mounting Hardware

Luminaire Mounting Hardware eliminates drilling through the luminaire housing to maintain IP66/IP67 "wet" location ingress protection rating.

Learn More

S-Hooks

S-Hooks are used with Jack and Double Loop Chain to support suspended luminaires. All S-Hooks are plated for lasting durability.

Learn More

Tie Wire

Our Tie Wire offers a variety of uses on the job site including bundling, supporting, hanging conduit and suspending luminaires.

Learn More

Duct Seal

EPCO's UL Listed Duct Seal Compound is used to seal around junction boxes, flashing, service mast, and cable entries.

Learn More

Surface Mount Bracket

EPCO's Surface Mount Bracket (SMB) provides the ability to locate and install a Narrow Body Linear Luminaire directly under a junction box to surface mount the luminaire to a ceiling or wall.

Learn More

Single and Dual-Gang Ground Bonding PigTails™

Dual-Gang Ground Bonding PigTails

EPCO's Dual-Gang PigTails include matched Flanged Spade and Ring Terminals to ensure a safe, reliable ground connection.

Learn More

Single-Gang Ground Bonding PigTails

EPCO's Single-Gang PigTails include matched Flanged Spade and Ring Terminals to ensure a safe, reliable ground connection.

Learn More

QuikWhip™ Fixture Whips

Stranded Wire - QuikWhip Fixture Whips

EPCO's Stranded Wire QuikWhip Fixture Whips provide significant Contractor time and labor savings!

Learn More

Solid Wire - QuikWhip Fixture Whips

EPCO's Solid Wire QuikWhip Fixture Whips provide significant Contractor time and labor savings!

Learn More

Fixture Whips with Die Cast Screw-In Connectors

Stranded Wire - 3/8" Die Cast Screw-In Fixture Whip

Our Stranded Wire 3/8" Conduit Die Cast Screw-In Fixture Whips are manufactured using UL Listed or UL recognized components.

Learn More

Solid Wire - 3/8" Die Cast Screw-In Fixture Whip

Our Solid Wire 3/8" Conduit Die Cast Screw-In Fixture Whips are manufactured using UL Listed or UL recognized components.

Learn More

Stranded Wire - 1/2" Die Cast Screw-In Fixture Whip

Our Stranded Wire 1/2" Conduit Die Cast Screw-In Fixture Whips are manufactured using UL Listed or UL recognized components.

Learn More

Solid Wire - 1/2" Die Cast Screw-In Fixture Whip

Our Solid Wire 1/2" Conduit Die Cast Screw-In Fixture Whips are manufactured using UL Listed or UL recognized components.

Learn More

Fixture Whips with Polycarbonate Snap-In Connectors

Stranded Wire - Polycarbonate Snap-In Fixture Whips

Our Stranded Wire Polycarbonate Snap-In Fixture Whips are manufactured using UL Listed or UL recognized components.

Learn More

Solid Wire - Polycarbonate Snap-In Fixture Whips

Our Solid Wire Polycarbonate Snap-In Fixture Whips are manufactured using UL Listed or UL recognized components.

Learn More

Fixture Whips with Die Cast Snap-In Connectors

Stranded Wire - Die Cast Snap-In Fixture Whips

Our Stranded Wire Die-Cast Snap-In Fixture Whips are manufactured using UL Listed or UL recognized components.

Learn More

Solid Wire - Die Cast Snap-In Fixture Whips

Our Solid Wire Die-Cast Snap-In Fixture Whips are manufactured using UL Listed or UL recognized components.

Learn More

Retrofit Fixture Whips with Die Cast Screw-In Connectors

Stranded Wire - Retrofit Fixture Whips

EPCO's Stranded Wire Retrofit Fixture Whips expedite installation when upgrading fluorescent luminaires with energy saving ballast.

Learn More

Solid Wire - Retrofit Fixture Whips

EPCO's Solid Wire Retrofit Fixture Whips expedite installation when upgrading fluorescent luminaires with energy-saving ballast.

Learn More