QuikWhips™

• Significant contractor time and labor savings!
• Average Time Savings: 45% or up to three (3) minutes per fixture installation.
• Approximate “installed” cost savings per fixture: $2.00 - $3.00.
• UL Listed - as a complete“listed”wire assembly that complies with the 2008 NEC.
• Pre-attached WAGO connectors add speed and dependability when finalizing terminations.
• Insert the fixture’s conductors into the WAGO connector and you’re finished.
• No tools required, no lock nuts to secure, no wire nuts to twist, and no taping is required.

The secret to QuikWhip’s unprecedented speed is pre-installed WAGO® Pushwire four-port connectors. The WAGO connectors simplify the connection from incoming power to the fixture. EPCO attaches WAGO connectors to one end or both ends of the QuikWhip for different applications. QuikWhip’s “tool-less”installation makes it a more cost-effective solution that eliminates lock nuts and wire nuts. Two die cast “snap-in” connectors snap directly into the fixture or electrical box for finalizing fixture whip terminations. The snap-in connectors are easier and faster to push through the knockout on the fixture compared to using internal “screw-in”connectors that require a locknut that must be screwed onto the connector.

QuikWhip's feature solid or stranded THHN conductors enclosed in six feet of 3/8” flexible steel conduit. When you add-up your time and material cost, you will realize it makes economic sense to buy “pre-fabricated," ready-to-install QuikWhips from Engineered Products Company.

The WAGO connector is a registered trademark of the WAGO Corporation, Germantown, Wisconsin.